2019-12-02
1.Liu, J., et al., Pt Monolayers on Electrodeposited Nanoparticles of Different Compositions for Ammonia Electro-Oxidation. Catalysts, 2019. 9(1).
2.Liu, J., J. Wang, and W. Hu, Erosion-corrosion behavior of X65 carbon steel in oilfield formation water. International Journal of Electrochemical Science, 2019. 14(1): p. 262-278.
3.Wang, J., et al., Influence of Storage Temperature on the Corrosion Behavior of Tinplate in Citric Acid Solution. International Journal of Electrochemical Science, 2019. 14(1): p. 59-74.
4.Wang, L., et al., Effect of Temperature on Corrosion Behavior of X65 Steel in Simulated Deep Sea Environment. International Journal of Electrochemical Science, 2019. 14(1): p. 161-172.
5. Xia, D.-H., et al., Identifying defect levels in organic coatings with electrochemical noise (EN) measured in Single Cell (SC) mode. Progress in Organic Coatings, 2019. 126: p. 53-61.
6. Cao, Y., et al., Interface engineering of NiS2/CoS2 nanohybrids as bifunctional electrocatalysts for rechargeable solid state Zn-air battery. Journal of Power Sources, 2019. 437.
7. Chen, B., et al., 1T '-ReS2 Confined in 2D-Honeycombed Carbon Nanosheets as New Anode Materials for High-Performance Sodium-Ion Batteries. Advanced Energy Materials, 2019. 9(30).
8. Chen, Z., et al., Highly Active and CO-Tolerant Trimetallic NiPtPd Hollow Nanocrystals as Electrocatalysts for Methanol Electro-oxidation Reaction. Acs Applied Energy Materials, 2019. 2(7): p. 4763-4773.
9. Ding, J., et al., Mesoporous Decoration of Freestanding Palladium Nanotube Arrays Boosts the Electrocatalysis Capabilities toward Formic Acid and Formate Oxidation. Advanced Energy Materials, 2019. 9(25).
10.Ding, J., et al., Sulfur-Grafted Hollow Carbon Spheres for Potassium-Ion Battery Anodes. Advanced Materials, 2019. 31(30).
11. Dong, Z., et al., Cavitation erosion behaviors of surface chromizing layer on 316L stainless steel. Ultrasonics Sonochemistry, 2019. 58.
12.Dong, Z., et al., Performance of surface chromizing layer on 316L stainless steel for proton exchange membrane fuel cell bipolar plates. International Journal of Hydrogen Energy, 2019. 44(39): p. 22110-22121.
13.Dong, Z., et al., Effects of pack chromizing on the microstructure and anticorrosion properties of 316L stainless steel. Surface & Coatings Technology, 2019. 366: p. 86-96.
14.Fan, X., et al., Investigation of the Environmental Stability of Poly(vinyl alcohol)-KOH Polymer Electrolytes for Flexible Zinc-Air Batteries. Frontiers in Chemistry, 2019. 7.
15. Fan, X., et al., Porous nanocomposite gel polymer electrolyte with high ionic conductivity and superior electrolyte retention capability for long-cycle-life flexible zinc-air batteries. Nano Energy, 2019. 56: p. 454-462.
16. Guo, L., et al., EFFECT OF ALLOYING ELEMENTS ON CORROSION POTENTIAL AND CORROSION PROPAGATION PROCESS OF MULTILAYER ALUMINUM-BRAZED SHEET. Surface Review and Letters, 2019. 26(7).
17.Guo, L., et al., CORROSION PROCESS OF MULTILAYER ALUMINUM- BRAZED SHEET BY EIS AND EN TECHNIQUES. Surface Review and Letters, 2019. 26(6).
18.Han, X., et al., Generation of Nanoparticle, Atomic-Cluster, and Single-Atom Cobalt Catalysts from Zeolitic Imidazole Frameworks by Spatial Isolation and Their Use in Zinc-Air Batteries. Angewandte Chemie-International Edition, 2019. 58(16): p. 5359-5364.
19.Han, X., et al., Atomically Dispersed Binary Co-Ni Sites in Nitrogen-Doped Hollow Carbon Nanocubes for Reversible Oxygen Reduction and Evolution. Advanced Materials, 2019.
20.Han, X., et al., Identifying the Activation of Bimetallic Sites in NiCo2S4@g-C3N4-CNT Hybrid Electrocatalysts for Synergistic Oxygen Reduction and Evolution. Advanced Materials, 2019. 31(18).
21. Hu, X., et al., Nitrogen-rich hierarchically porous carbon as a high-rate anode material with ultra-stable cyclability and high capacity for capacitive sodium-ion batteries. Nano Energy, 2019. 56: p. 828-839.
22.Huang, X., et al., Toward Flexible and Wearable Zn-Air Batteries from Cotton Textile Waste. ACS omega, 2019. 4(21): p. 19341-19349.
23.Li, M., et al., Long-Shelf-Life Polymer Electrolyte Based on Tetraethylammonium Hydroxide for Flexible Zinc-Air Batteries. Acs Applied Materials & Interfaces, 2019. 11(32): p. 28909-28917.
24.Li, Q., et al., Determination of Corrosion Types from Electrochemical Noise by Gradient Boosting Decision Tree Method. International Journal of Electrochemical Science, 2019. 14(2): p. 1516-1528.
25. Li, Q.-S., et al., Effect of Deep Sea Pressures on the Corrosion Behavior of X65 Steel in the Artificial Seawater. Acta Metallurgica Sinica-English Letters, 2019. 32(8): p. 972-980.
26. Li, Y., et al., Recent Advances in Flexible Zinc-Based Rechargeable Batteries. Advanced Energy Materials, 2019. 9(1).
27. Liu, P., et al., Porous Zinc Anode Design for Zn-air Chemistry. Frontiers in chemistry, 2019. 7: p. 656-656.
28. Liu, X., J. Wang, and W. Hu, Synthesis, inhibition behavior and recycling of Fe3O4@ZnAl-MoO4 LDH nanocomposite inhibitor. Journal of Alloys and Compounds, 2019. 801: p. 489-501.
29. Liu, X., et al., Utilizing solar energy to improve the oxygen evolution reaction kinetics in zinc-air battery. Nature Communications, 2019. 10.
30. Liu, Y., et al., Combining the Advantages of Hollow and One-Dimensional Structures: Balanced Activity and Stability toward Methanol Oxidation Based on the Interface of PtCo Nanochains. Acs Applied Energy Materials, 2019. 2(3): p. 1588-1593.
31. Ma, W., et al., Numerical Simulation and Experimental Validation of the Erosion Behaviour of X65 Pipeline Steel under Different Flow Velocities and Sand Concentrations. International Journal of Electrochemical Science, 2019. 14(3): p. 2560-2573.
32.Sun, Y., et al., Recent advances and challenges in divalent and multivalent metal electrodes for metal-air batteries. Journal of Materials Chemistry A, 2019. 7(31): p. 18183-18208.
33.Wang, H.-H., et al., Size-controllable synthesis and high-performance formic acid oxidation of polycrystalline Pd nanoparticles. Rare Metals, 2019. 38(2): p. 115-121.
34. Wang, X., et al., Tempering effects on the microstructure and properties of submerged arc surfacing layers of H13 steel. Journal of Materials Processing Technology, 2019. 269: p. 26-34.
35. Wang, Y.-C., et al., Development of an electrochemical sensor and measuring the shelf life of tinplate cans. Measurement, 2019. 134: p. 500-508.
36. Wei, H., et al., Studies on the Effect of the Substrate on the Electrocatalytic Performance of Electrodeposited NiFe Hydroxides for Oxygen Evolution Reaction. International Journal of Electrochemical Science, 2019. 14(5): p. 4173-4184.
37. Wu, J., et al., Recent Progress in Advanced Characterization Methods for Silicon-Based Lithium-Ion Batteries. Small Methods, 2019. 3(10).
38. Xia, D.-H., et al., Sulfur induced corrosion (SIC) mechanism of steam generator (SG) tubing at micro scale: A critical review. Materials Chemistry and Physics, 2019. 233: p. 133-140.
39.Xia, D.-H., et al., Sensing corrosion within an artificial defect in organic coating using SECM. Sensors and Actuators B-Chemical, 2019. 280: p. 235-242.
40.Xie, S., J. Wang, and W. Hu, Synthesis and Corrosion Resistance of ZnAl Layered Double Hydroxide Film on Q235 Steel. International Journal of Electrochemical Science, 2019. 14(7): p. 6773-6789.
41.Xing, X., et al., Influence of Acid Treatment on the Loading and Release Behavior of Halloysite with 2-Mercaptobenzothiazole. Journal of Nanoscience and Nanotechnology, 2019. 19(11): p. 7178-7184.
42. Xing, X., et al., Preparation and inhibition behavior of ZnMoO4/reduced graphene oxide composite for Q235 steel in NaCl solution. Applied Surface Science, 2019. 479: p. 835-846.
43. Xing, X., et al., Preparation, release and anticorrosion behavior of a multi-corrosion inhibitors-halloysite nanocomposite. Chemical Physics Letters, 2019. 718: p. 69-73.
44. Yang, C., et al., Confined Fe2VO4 subset of Nitrogen-Doped Carbon Nanowires with Internal Void Space for High-Rate and Ultrastable Potassium-Ion Storage. Advanced Energy Materials, 2019.
45. Yin, L., et al., Enhanced antibacterial properties of biocompatible titanium via electrochemically deposited Ag/TiO2 nanotubes and chitosan-gelatin-Ag-ZnO complex coating. Rsc Advances, 2019. 9(8): p. 4521-4529.
46. Zhang, M., et al., Enhanced light harvesting and electron-hole separation for efficient photocatalytic hydrogen evolution over Cu7S4-enwrapped Cu2O nanocubes. Applied Catalysis B-Environmental, 2019. 246: p. 202-210.
47. Zhang, X., et al., Image Analysis of Synthesized Corrosion Products Applied to In-situ Analysis of Q235 Steel under Simulated Marine Atmosphere. International Journal of Electrochemical Science, 2019. 14(2): p. 1713-1724.
48. Zhao, J., et al., Engineering the Surface Metal Active Sites of Nickel Cobalt Oxide Nanoplates toward Enhanced Oxygen Electrocatalysis for Zn-Air Battery. Acs Applied Materials & Interfaces, 2019. 11(5): p. 4915-4921.
49. Zhao, Z., et al., Challenges in Zinc Electrodes for Alkaline Zinc-Air Batteries: Obstacles to Commercialization. Acs Energy Letters, 2019. 4(9): p. 2259-2270.
50. Zheng, X., et al., Pt embedded Ni3Se2@NiOOH core-shell dendrite-like nanoarrays on nickel foam as bifunctional electrocatalysts for overall water splitting. Science China-Materials, 2019. 62(8): p. 1096-1104.
51. Zheng, X., et al., Bimetallic Metal-Organic-Framework/Reduced Graphene Oxide Composites as Bifunctional Electrocatalysts for Rechargeable Zn-Air Batteries. Acs Applied Materials & Interfaces, 2019. 11(17): p. 15662-15669.
52. Zheng, X., et al., Engineering Interface and Oxygen Vacancies of NixCo1-xSe2 to Boost Oxygen Catalysis for Flexible Zn-Air Batteries. Acs Applied Materials & Interfaces, 2019. 11(31): p. 27964-27972.
53. Zheng, X., et al., Controllable synthesis of nickel sulfide nanocatalysts and their phase-dependent performance for overall water splitting. Nanoscale, 2019. 11(12): p. 5646-5654.
54. Zheng, X., et al., Facile synthesis of nickel cobalt selenide hollow nanospheres as efficient bifunctional electrocatalyst for rechargeable Zn-air battery. Science China-Materials, 2019.
55. Zhou, T., et al., The antibacterial W-containing microarc oxidation coating on Ti6Al4V. Surface & Coatings Technology, 2019. 374: p. 242-252.
